Free Service Agreement

Answer a few simple questions Print and download instantly It takes just 5 minutes

Create Your Free Service Agreement

  1. Answer a few simple questions
  2. Email, download or print instantly
  3. Just takes 5 minutes

Service Agreement

Billing Details


Billing Details

hand holding coins
clock
daily calendar
weekly calendar
monthly calendar
document with coins

How much is the fee?
$
e.g. 10,000





Your Service Agreement

Update Preview
This document preview is formatted to fit your mobile device. The formatting will change when printed or viewed on a desktop computer.
Service Agreement Page of
Page of

GENERAL SERVICE AGREEMENT

THIS GENERAL SERVICE AGREEMENT (the "Agreement") is dated this ________ day of ________________, ________.

Client

____________________________________________________
(the "Client")

Contractor

____________________________________________________
(the "Contractor")
  1. BACKGROUND
  2. The Client is of the opinion that the Contractor has the necessary qualifications, experience and abilities to provide services to the Client.
  3. The Contractor is agreeable to providing such services to the Client on the terms and conditions set out in this Agreement.

IN CONSIDERATION OF the matters described above and of the mutual benefits and obligations set forth in this Agreement, the receipt and sufficiency of which consideration is hereby acknowledged, the Client and the Contractor (individually the "Party" and collectively the "Parties" to this Agreement) agree as follows:

  1. Services Provided
  2. The Client hereby agrees to engage the Contractor to provide the Client with the following services (the "Services"):
    • _______________________________________________________________
      _______________________________________________________________.

  3. The Services will also include any other tasks which the Parties may agree on. The Contractor hereby agrees to provide such Services to the Client.
  4. Term of Agreement
  5. The term of this Agreement (the "Term") will begin on the date of this Agreement and will remain in full force and effect until the completion of the Services, subject to earlier termination as provided in this Agreement. The Term may be extended with the written consent of the Parties.
  6. Performance
  7. The Parties agree to do everything necessary to ensure that the terms of this Agreement take effect.
  8. Currency
  9. Except as otherwise provided in this Agreement, all monetary amounts referred to in this Agreement are in NZD (New Zealand Dollars).
  10. Payment
  11. The Contractor will charge the Client a flat fee of $__________ for the Services (the "Payment").
  12. The Contractor will invoice the Client when the Services are complete.
  13. Invoices submitted by the Contractor to the Client are due within 30 days of receipt.
  14. Reimbursement of Expenses
  15. The Contractor will be reimbursed from time to time for reasonable and necessary expenses incurred by the Contractor in connection with providing the Services.
  16. All expenses must be pre-approved by the Client.
  17. Confidentiality
  18. Confidential information (the "Confidential Information") refers to any data or information relating to the Client, whether business or personal, which would reasonably be considered to be private or proprietary to the Client and that is not generally known and where the release of that Confidential Information could reasonably be expected to cause harm to the Client.
  19. The Contractor agrees that they will not disclose, divulge, reveal, report or use, for any purpose, any Confidential Information which the Contractor has obtained, except as authorised by the Client or as required by law. The obligations of confidentiality will apply during the Term and will survive indefinitely upon termination of this Agreement.
  20. All written and oral information and material disclosed or provided by the Client to the Contractor under this Agreement is Confidential Information regardless of whether it was provided before or after the date of this Agreement or how it was provided to the Contractor.
  21. Ownership of Intellectual Property
  22. All intellectual property and related material, including any trade secrets, moral rights, goodwill, relevant registrations or applications for registration, and rights in any patent, copyright, trade mark, trade dress, industrial design and trade name (the "Intellectual Property") that is developed or produced under this Agreement, will be the sole property of the Client. The use of the Intellectual Property by the Client will not be restricted in any manner.
  23. The Contractor may not use the Intellectual Property for any purpose other than that contracted for in this Agreement except with the written consent of the Client. The Contractor will be responsible for any and all damages resulting from the unauthorised use of the Intellectual Property.
  24. Return of Property
  25. Upon the expiry or termination of this Agreement, the Contractor will return to the Client any property, documentation, records, or Confidential Information which is the property of the Client.
  26. Capacity/Independent Contractor
  27. In providing the Services under this Agreement it is expressly agreed that the Contractor is acting as an independent contractor and not as an employee. The Contractor and the Client acknowledge that this Agreement does not create a partnership or joint venture between them, and is exclusively a contract for service.
  28. Right of Substitution
  29. Except as otherwise provided in this Agreement, the Contractor may, at the Contractor's absolute discretion, engage a third party sub-contractor to perform some or all of the obligations of the Contractor under this Agreement and the Client will not hire or engage any third parties to assist with the provision of the Services.
  30. In the event that the Contractor hires a sub-contractor:
    • the Contractor will pay the sub-contractor for its services and the Payment will remain payable by the Client to the Contractor.
    • for the purposes of the indemnification clause of this Agreement, the sub-contractor is an agent of the Contractor.
  31. Autonomy
  32. Except as otherwise provided in this Agreement, the Contractor will have full control over working time, methods, and decision making in relation to provision of the Services in accordance with the Agreement. The Contractor will work autonomously and not at the direction of the Client. However, the Contractor will be responsive to the reasonable needs and concerns of the Client.
  33. Equipment
  34. Except as otherwise provided in this Agreement, the Contractor will provide at the Contractor’s own expense, any and all tools, machinery, equipment, raw materials, supplies, workwear and any other items or parts necessary to deliver the Services in accordance with the Agreement.
  35. No Exclusivity
  36. The Parties acknowledge that this Agreement is non-exclusive and that either Party will be free, during and after the Term, to engage or contract with third parties for the provision of services similar to the Services.
  37. Notice
  38. All notices, requests, demands or other communications required or permitted by the terms of this Agreement will be given in writing and delivered to the Parties at the following addresses:
    • ______________________
      ______________________________
    • ______________________
      ______________________________

    or to such other address as either Party may from time to time notify the other.

  39. Indemnification
  40. Except to the extent paid in settlement from any applicable insurance policies, and to the extent permitted by applicable law, each Party agrees to indemnify and hold harmless the other Party, and its respective affiliates, officers, agents, employees, and permitted successors and assigns against any and all claims, losses, damages, liabilities, penalties, punitive damages, expenses, reasonable legal fees and costs of any kind or amount whatsoever, which result from or arise out of any act or omission of the indemnifying party, its respective affiliates, officers, agents, employees, and permitted successors and assigns that occurs in connection with this Agreement. This indemnification will survive the termination of this Agreement.
  41. Modification of Agreement
  42. Any amendment or modification of this Agreement or additional obligation assumed by either Party in connection with this Agreement will only be binding if evidenced in writing signed by each Party or an authorised representative of each Party.
  43. Time of the Essence
  44. Time is of the essence in this Agreement. No extension or variation of this Agreement will operate as a waiver of this provision.
  45. Assignment
  46. The Contractor will not voluntarily, or by operation of law, assign or otherwise transfer its obligations under this Agreement without the prior written consent of the Client.
  47. Entire Agreement
  48. It is agreed that there is no representation, warranty, collateral agreement or condition affecting this Agreement except as expressly provided in this Agreement.
  49. Enurement
  50. This Agreement will enure to the benefit of and be binding on the Parties and their respective heirs, executors, administrators and permitted successors and assigns.
  51. Titles/Headings
  52. Headings are inserted for the convenience of the Parties only and are not to be considered when interpreting this Agreement.
  53. Gender
  54. Words in the singular mean and include the plural and vice versa. Words in the masculine mean and include the feminine and vice versa.
  55. Governing Law
  56. This Agreement will be governed by and construed in accordance with the laws of New Zealand.
  57. Severability
  58. In the event that any of the provisions of this Agreement are held to be invalid or unenforceable in whole or in part, all other provisions will nevertheless continue to be valid and enforceable with the invalid or unenforceable parts severed from the remainder of this Agreement.
  59. Waiver
  60. The waiver by either Party of a breach, default, delay or omission of any of the provisions of this Agreement by the other Party will not be construed as a waiver of any subsequent breach of the same or other provisions.

IN WITNESS WHEREOF the Parties have duly affixed their signatures under hand and seal on this ________ day of ________________, ________.

_______________________________
______________________ (Client)
_______________________________
______________________ (Contractor)
Service Agreement Page of
©2002-2024 LawDepot.com®

Last Updated April 9, 2024

What is a Service Agreement?

A written Service Agreement is a contract that defines the terms and conditions of a working arrangement between a contractor and their client. This type of contract outlines a contractor's service to a client in exchange for payment.

If you are a contractor who provides services, use a Service Agreement to define the service and pricing terms to your client clearly. As a client, if your contractor doesn’t initiate a written agreement, you can create one to prevent future disagreements and ensure accountability.

Using a written Service Agreement benefits contractors and clients by clearly outlining the terms of their working arrangement. A Service Agreement provides transparency and accountability for both parties and helps prevent disputes that could arise without a formal agreement.

You can use a Service Agreement for a single project, a job that ends on a specific date, or work that is ongoing.

A Service Agreement is also known as a:

  • General service contract
  • Service-level agreement
  • Contract for services
  • Professional services agreement

Who are the parties to a Service Agreement?

Within a Service Agreement, there’s a contractor and a client. The contractor (also known as the service provider) provides a service for the client, who pays the contractor for their work. Either party can be an individual or an organisation. Also, the client might be two or more people, such as a married couple. Similarly, the contractor could be two or more partners who all sign the agreement.

What is a contractor?

A contractor is a skilled person (or organisation) who provides services for other parties. Often, individual contractors are self-employed and run their own business. Generally, contractors don’t have employment protections because labour laws don’t apply to independent contractors.

If an organisation hires a contractor, they hire the contractor as an external worker, rather than internal staff, for a set time (or project). For example, a company may hire a freelance accountant rather than employing one to work in-house.

Outsourcing work to professional contractors with specific skills is very common and allows clients to access the exact services they need without hiring new staff. Contractors can come from every industry and include labourers, skilled tradespeople, and freelancers.

Typically, contractors:

  • Have more than one client
  • Send invoices to their clients
  • Use their own tools or equipment
  • May hire employees or subcontractors to help complete services
  • Don’t receive employment benefits from clients

What do I include in a Service Agreement?

To create an effective Service Agreement, address the following details:

  • Service duration: Specify whether the contractor will provide service for a single job, a specific period of time, or indefinitely.
  • Service details: Describe the service the client hires the contractor to provide.
  • Contractor and client information: Specify if each party is an individual or company and provide their names, addresses, and New Zealand Business Numbers (NZBN), if applicable.
  • Billing details: Outline how much the contractor will charge and if they’ll charge the client a flat fee, at an hourly rate, or in another way. If the contractor requires a deposit, set a deposit amount. Outline when the client must pay and if they’ll pay in instalments. Set the interest rate which can be charged on any late payments.
  • Notice periods: If both parties agree to end the agreement early, outline the number of days that the terminating party must provide written notice to the other party.
  • Expenses: Decide if the client will reimburse the contractor for reasonable work-related expenses and if the contractor needs the client’s approval before incurring expenses.
  • Intellectual property ownership: Specify which party owns any intellectual property that the contractor creates. Intellectual property is any work that is a creation of the mind.
  • Confidentiality: Decide if the contractor must keep client information confidential.

You can create an effective contract using LawDepot’s Service Agreement template by providing all the necessary information. Be clear and specific when describing the job or project the client requires and indicate any important dates.

How do I enforce a Service Agreement?

If your contractor or client breaches your Service Agreement, you should try to enforce the contract’s terms by contacting the offending party, pointing out their obligations, and requesting that they fulfil their part of the agreement. Communicate with the other party in a civil and non-offensive manner to ensure a better chance of compliance. Also, they should be provided with enough notice to rectify their actions.

If the offending party doesn’t rectify the situation, you can take legal action for breach of contract.

Related Documents:

Thumbnail of sample of Service Agreement document

Sample

Service Agreement

Personalise your Service Agreement.

Print or download in minutes.

Create your free Service Agreement in 5-10 minutes or less
This document preview is formatted to fit your mobile device. The formatting will change when printed or viewed on a desktop computer.
Loading ...
Loading ...

Note: Your initial answers are saved automatically when you preview your document.
This screen can be used to save additional copies of your answers.